DUAL XDM17BT INSTALLATION & OWNER'S MANUAL Pdf Download (2024)

FAQs

How to reset dual media player Bluetooth xdm17bt? ›

Insert a 3.5mm cable in the unit's front AUX port. Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located on the front panel.

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control. - Radio mode on the APP allows you to scan and store radio stations or select your favorite radio station via the radio presets.

The device name is “Dual Media Player”. The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000".

Press RESET upon initial installation or if abnormal operation occurs. The reset hole is located under the volume knob of the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release.

If a passkey* is required on the display of the BLUETOOTH device, enter “0000.” A passkey may be called “Passcode”, “PIN code”, “PIN number” or “Password.” Make the BLUETOOTH connection from the BLUETOOTH device. When the BLUETOOTH connection is established, the (BLUETOOTH) indicator stays lit.

If you don't have the manual, set a passkey from your infotainment system's phone settings menu. And if that doesn't work, your local dealer may be able to provide you with the original passkey. Many Bluetooth devices use "1234," "1111," and other simple passkeys by default.

Understanding the Android PIN Code

It is usually a 4-digit number, though some devices allow longer PINs. When you set up a PIN, the device encrypts data and can only be accessed by entering the correct PIN.

There are a few apps that connect multiple Bluetooth devices, including AmpMe, Bose Connect, and Ultimate Ears. AmpMe is the most versatile, as it's not brand-specific, while the Bose and Ultimate Ears apps require the respective company's Bluetooth speakers.

Most smartphones, TVs and computers and tablets manufactured since 2017 have Bluetooth 5.0 technology, which can connect up to seven different Bluetooth devices at once.

How do I sync dual Bluetooth? ›

The reset button is located on the front panel. With the unit on, press DISP to display clock time. Press and hold DISP until the hours begins to flash, then release.

The device name is “Dual Media Player”. The Bluetooth passcode is "1234”. Note: The head unit can be in any mode of operation when pairing is performed.

Press the voice activation button, and the receiver will switch into Bluetooth mode, This will activate Siri® or Google Assistant™ on your smartphone.